{"id":239,"date":"2010-06-01T07:00:15","date_gmt":"2010-06-01T07:00:15","guid":{"rendered":"http:\/\/www.propertydecorating.co.uk\/blog\/?p=239"},"modified":"2010-06-01T07:00:15","modified_gmt":"2010-06-01T07:00:15","slug":"how-to-deal-with-water-stains","status":"publish","type":"post","link":"https:\/\/www.propertydecorating.co.uk\/blog\/?p=239","title":{"rendered":"How to deal with water stains"},"content":{"rendered":"

\"Graphic<\/p>\n

How to deal with stains<\/h1>\n

Following a recent job I did I thought I would do a post about how to deal with stains, in this case, water stains.<\/p>\n

I had a call from a client who had a Velux window that appeared to be leaking and had stained the ceiling of their garden room.<\/p>\n

After the roofer came and found the source of the problem, a broken tile, and repaired it I went back and decorated the room for them.<\/p>\n

The source of the leak had been fixed and the water had dried out so I could start to decorate.<\/p>\n

\"A<\/p>\n

The first thing I did was identifying the stain by drawing around each stain with a pencil so it was easier to see when I used the stain block.<\/p>\n

Once I had highlighted all the water stains with a pencil I used Polycell Stain Block to cover the stains, using a brush I painted over the stains, I knew how far to go as I had drawn around the stains. I covered the stains and pencil lines with the stain block, I then prepared the rest of the garden room by filling cracks to the walls while I waited for it to dry which took about two hours.<\/p>\n

Once the stain block was dry I could paint the ceiling with white emulsion and the ceiling was as good as new, I then painted the walls to complete the job.<\/p>\n

Another job and another satisfied client.<\/p>\n

Always ensure the source of the leak is fixed and that you allow time for the water to dry out before decorating.
\nSome stains may need a second coat of stain block, allow to dry between coats.
\nAllow the stain block to dry fully before decorating.<\/p>\n

Some people use an oil-based paint such as gloss, undercoat or satinwood to block out the stain, I have done this in the past but would only recommend using satinwood or undercoat due to it’s sheen level.<\/p>\n","protected":false},"excerpt":{"rendered":"

How to deal with stains Following a recent job I did I thought I would do a post about how to deal with stains, in this case, water stains. I had a call from a client who had a Velux window that appeared to be leaking and had stained the ceiling of their garden room. […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[394,499,604],"class_list":["post-239","post","type-post","status-publish","format-standard","hentry","category-tips","tag-polycell","tag-stain-block","tag-water-stain"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t