Water-based or Oil-based paint? Always read the label

When you buy paint you should always read the label printed on the tin, not only to see what the manufactures say you should do, but also to find out the type of paint you are using.

Sounds like a silly question, but if you are using a gloss or satinwood finish, is it water-based (or acrylic) or is it an oil-based product?

By knowing weather it is water-based or oil-based it will determine a few things, such as drying times, the application method you may want to use, and what you need to use to clean your brushes with, either water or brush cleaner/white spirit.

Things to look out for;
The symbols on the tin. It should have a symbol saying “clean brushes with water” or “clean brushes with brush cleaner” for oil based paints.
The VOC level will be low to medium on water-based paint and high on oil based.

Why do you need to know this information?

Knowing if the paint your using is oil or water based could help you make a decision about what type of paint to buy, if you prefer oil-based paints as you find them easier to work with than water-based paint, or do you prefer water-based as it dries quicker? As you need to get a job done before it rains, or the kids come home!

It also good to know if you can simply wash your brushes in water or if you have to wash then in brush cleaner such as white spirit. You don’t want to be washing them out in the wrong thing, or storing them incorrectly as this will ruin your brush.

Climbers and Ivy can damage your house

Climbers and ivy growing up a wall or your house can look very idyllic but you could be heading for costly repair bills if left to grow.

This post comes after decorating an exterior of a property recently. The walls were rendered and needed re-painting with masonry paint. One wall had in the past had ivy growing up the wall but had been removed.

The main issues was that when the ivy was pulled off the wall it took some of the old masonry paint with it, and left lots of the ‘suckers’ from the ivy. The wall looked ‘hairy’ and after my best efforts scrapping and pulling all the bits off, I couldn’t remove all of the old ivy from the wall, luckily it was in an area which could not be seen, which is, I guess why the ivy got a hold in the first place. After painting, the wall looked OK although you could see where the ivy had been.

If you have ivy or any climbers climbing up your walls be aware they could potentially damage your house, many climbers will pull the mortar out of the brickwork exposing gaps between the bricks where water can get in, also any evergreen climber that has leaves on all year round can trap water against the wall and create damp indoors.

Climbers can also, if allowed to, will get behind fascia board and under soffits and even lift roof tiles.

So it maybe a good idea, to consider how these plants can affect your house before planting climbers against your house walls.

Getting a professional finish – a quick guide to gloss work

When you are painting gloss paintwork many people find they end up with brush marks in the final dried paintwork. This could be due to a couple of reasons.

I have been asked, how come I don’t get lots of brush marks, runs or dirt in my gloss work.

Preparation, Brushes and Paint

Firstly, your preparation is vital and shouldn’t be overlooked. You may find my post on Decoration and Preparation of interest.

Also you need to use a good quality brush, many cheaper brushes can be too wiry and stiff which can cause brush marks in the wet gloss.

Another thing to consider is to use a good quality gloss paint; many top brands will flow well as you apply the gloss to the woodwork eliminating brush strokes as it dries. Cheaper brands or solid non-drip type gloss can be a bit thick to apply and may not flow that well.

Applying the Gloss Paint

The other thing you need to consider is how you apply the gloss, you need to put enough on but not so much the gloss runs. This comes with experience and knowing the products you are using.

Once you have applied the gloss, use the brush to go over the area you have just painted with long strokes with an unloaded brush, this will help spread the gloss more evenly. Once you have done this, go over the area again with the unloaded brush with even lighter strokes until you are barely toughing the paint.

If you follow these basic steps your gloss work should look more like a professional has done it.

Be aware that if you are painting gloss paint and it is in a damp atmosphere, such as outside, you may get a ‘bloom’ (a dullness) over it by the next day and the sheen will be gone, and you will have to re-paint it. To avoid this, don’t paint gloss in a damp atmosphere of too early or too late in the year when the damp can affect your paint.

Please note: This post refers to oil based gloss paint and not water based gloss paint, although the principles are the same, drying times and how it acts differ.